Luer Conversion Kits (Column Connections)
Enhance Performance and Increase Reliability
The EZ Luer Kit, also known as Luer conversion kits, designed to connect our Purity Flash Cartridges and competitors’ cartridges with Luer connections to our EZ Flash Pump or a pump with 1/8″ fittings. One simple connection enables you to realize the benefits of the EZ and Purity Flash Cartridges on your Biotage, Buchi, Interchim, Isco, or FlashMaster systems.
Why replace a functional system when you can inexpensively enhance its performance?
Cartridge systems requiring compression modules or plungers use expensive, damage-prone o-rings. These costly devices wear out and can be challenging to use. One customer reported these components comprised just under 15% of their consumable purchases in a single year. When budgets are tight, this is an excellent opportunity to save money.
While Isco systems allow for the use of luer fittings, the column holders limit the size of the cartridges you can use. While many of our EZ and Purity™ Flash cartridges fit on these systems without modifications, our larger sized cartridges however, will not. By adding our simple Luer Conversion Kit you can take your separations to the next level, giving you access to all of our available Flash Cartridges.
Catalog No. | Description | Price (USD) |
---|---|---|
EZLCK1 | EZ Luer Kit for using male/female luer columns. Kit contains tubing for connecting EZ Mini Pump to cartridge and tubing for connecting cartridge to EZ Fraction Collector. | Buy now $274.55 |
EZLCK2 | EZ Luer Connector for Large Flash Cartridges (800g, 1600g, 3kg, and 5kg sizes) | Buy now $175.00 |
- Luer connector kit for large columns (800g, 16009, 3kg and 5kg) consists of four main components as follows.
2. Install the Luer Connector for Outlet at the outlet of the column. Install the Flangeless Nut with Flangeless Ferrule on it.
3. Install the Luer Connector for Inlet at the inlet of the column. This can be installed by hand and needs to be screwed in manually. Install the Flangeless Nut with Flangeless Ferrule on it.
4. The entire assembly will appear as the picture shown below. Connect the inlet and outlet tubings from the flash system to the inlet and outlet of the column.