 |
Chromabond® Polypropylene Columns
- PP columns with PE filter elements
- Different sizes from 1, 3, 6 up to 150 ml
- Adsorbent weights from 20 mg to 50 g
- Male luer tip as exit
- Compatible with most robots (e. g. Gilson ASPEC™, Caliper AutoTrace®, …)
|
 |
Chromabond® Glass Columns
- Glass columns with chemically very inert glass fiber
- Filter elements (nominal pore size 1 µm)
- Two different sizes: 3 and 6 ml
- Available with all CHROMABOND® phases
- Excludes any influence from the column material (e. g. plasticizers, …)
|
 |
Chromafix® Cartridges
- PP cartridges with PE filter elements
- Three different sizes with different adsorbent weights: Small (0.4 ml), Medium (0.8 ml), Large (1.8 ml)
- Female Luer tip at the inlet, male Luer tip as exit
- Offers an alternative way of handling using positive pressure by syringes or peristaltic pumps
- Especially suited for convenient solid-phase extraction of small sample volumes
|
 |
Chromabond® LV Columns
- Large volume PP columns with PE filter elements
- Three different adsorbent weights (100, 200 and 500 mg)
- funnel-shaped reservoir with 15 ml volume
- Especially for the clinical samples-the whole sample (e. g. urine, serum, blood) can be applied to the column in one step
- Can be directly used in the Zymate® lab robots of Zymark
|
 |
Chromabond® Multi 96- SPE in 96-Well format
- 96-well polypropylene plates with PE filter elements
- Cavity volume of 1.5 ml
- Adsorbent weights from 25 to 100 mg
- Supplied with any CHROMABOND® SPE adsorbents
- For simultaneous preparation of 96 samples
- Easy method transfer from CHROMABOND® columns or CHROMAFIX® cartridges to CHROMABOND® MULTI 96
- Readily adaptable to all common automated/robotic handling systems
|
Buy now $243.00
